產品詳情
電動啞鈴制樣機生產廠家
啞鈴制樣機
概述：
1.1 主要用途及適用范圍
啞鈴型試驗機主要用于GB/T8804.3-2003、GB/T8804.1-2003、 GB/T1040、JT/T529-2016、ISO527等標準中規定的Ⅰ、Ⅱ、III型試樣或其它型試樣（根據客戶不同的需求訂做適用于不同試樣的靠模），試樣厚度2-67mm，試樣長度≤250mm。
1.2 工作原理
通過不同試樣需要的專用靠模，通過啞鈴型試樣機磨制出各種啞鈴型試樣。
1.3 工作條件
① 環境溫度：10℃～40℃的范圍內；
② 環境相對濕度在30%—80%以內；
③ 周圍無震動，無腐蝕性介質的環境中；
④ 在穩固的基礎上正確地安裝并調至水平；
⑤ 工作時無強磁場干擾，周圍空氣無強對流。
主要技術參數：
|
電源電壓 |
220V |
|
功率 |
200w |
|
外形尺寸 |
400 mm×400 mm×400mm |
|
整機重量 |
35Kg |
電動啞鈴制樣機生產廠家
Dumbbell Specimen Maker
Overview
1.1 Main Purpose and Scope of Application
The dumbbell-shaped specimen maker is mainly used for preparing specimens conbing to standards such as GB/T 8804.3-2003, GB/T 8804.1-2003, GB/T 1040, JT/T 529-2016, and ISO 527. It supports Type I, II, and III specimens (or other types, with customized templates available for different specimen requirements based on customer needs). Specimen thickness ranges from 2–67 mm, and specimen length is ≤250 mm.
1.2 Working Principle
By using specialized templates tailored to different specimen requirements, the machine grinds out various dumbbell-shaped specimens.
1.3 Working Conditions
-
Ambient temperature: Within the range of 10°C–40°C;
-
Ambient relative humidity: Within 30%–80%;
-
Environment: Free from vibration and corrosive media;
-
Installation: Correctly installed on a stable foundation and leveled;
-
Interference: No strong magnetic field interference during operation, and no strong air convection in the surrounding area.
Main Technical Parameters
-
Power Supply Voltage: 220V
-
Power: 200W
-
Overall Dimensions: 400 mm×400 mm×400 mm
-
Overall Weight: 35 kg
