搜一搜液下渣漿泵過流A尚義液下渣漿泵過流

2，渣漿泵的部分部件歸于易損件，在平時運用中要重視易損件的損耗狀況，及時對其進行修理或替換。渣漿泵易損件修理或替換的過程中要確保裝配準確，空隙調整合理，防止緊澀磨擦表象的呈現。3，渣漿泵的吸入管路體系有必要無漏氣狀況，一起在操作中應留意吸進口是否有阻塞表象。渣漿泵所需處理的介質多帶有固體顆粒，因此在進泵池放置的隔柵應契合渣漿泵所能經過顆粒的需求，削減過大顆粒或長纖維物料進入泵體形成阻塞的也許性。

一、產品概述SP液下渣漿泵為立式離心液下渣漿泵，浸入液下，用于輸送磨蝕性、粗顆粒、高濃度渣漿。不需要任何軸封和軸封水，在吸入量不足的工況下也能正常工作。

SP型液下渣漿泵過流部件由耐磨金屬制成。 

根據渣漿池液面的高低，可選擇不同長度的泵傳動軸或吸入管。 

采用多種速度和多種變型方式，使得泵在最佳工況下運行，使用壽命長，運行效益高，能滿足多類惡劣的輸送條件。 

Second, SP liquid slurry pump application Range 
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in bllurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure debion 
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.

搜一搜液下渣漿泵過流A尚義液下渣漿泵過流

單吸懸臂式結構，用軸承體，固定盤，連接管連接泵的水力部件，液體由出水管部件排出，泵的葉輪為半開式葉輪，在葉輪葉片進口延伸處設有攪拌葉片，該泵主要特點是液下部位的泵軸有足夠的剛度，葉輪，泵體之間不設軸承，不采用軸封，可以輸送含有較大濃度固體顆粒的介質。立式液下渣漿泵主要用于環保，新型建材，洗煤，市政工程，火力發電，煤氣焦化廠，煉油廠，煉鋼廠，采礦，造紙業，水泥廠，食品廠，加汽混凝土。液下渣漿泵為單級印染等行業抽吸濃液，稠油，油渣，污濁液，泥漿，灰漿，流砂及城市排污溝道的流動污泥，以及含有煤塊，灰渣的液體。也可作為化工，醫藥等行業抽吸含有泥砂渣物的流體和有腐蝕性液體。???。

五、型號意義

    40 PV-SP

   40----------吐出口徑40mm

   PV--------- PV型軸承組件

   SP----------液下泵

水泵安裝

 泵安裝的好壞對泵的運行和壽命冇重要影響，所以安裝和校正必須仔細進行。泵的外形及安裝尺寸。