產品詳情
性能特點：<\/strong> <\/p> -本機床主要用于建筑鋼結構聯接板以及其它機械應用行業平板類材料孔的加工。 設備特點：<\/strong> <\/p> -本機床主要由機座、龍門、鉆削動力頭、換位工作臺、排屑器、電氣系統、液壓系統、集中潤滑系統等部件組成。 <\/b><\/p> 型號<\/span>Model<\/span> <\/p> <\/td> DPD1610<\/span> <\/p> <\/td> DPD2016<\/span> <\/p> <\/td> DPD3016<\/span> <\/p> <\/td> <\/tr> 加工尺寸<\/span> <\/p> Size of workpiece<\/span> <\/p> <\/td> 材料重疊厚度<\/span> <\/p> Thickness of workpiece<\/span>（<\/span>mm<\/span>）<\/span> <\/p> <\/td> 最大<\/span>(Max)80<\/span> <\/p> <\/td> 最大<\/span>(Max)80/100<\/span> <\/p> <\/td> 最大<\/span>(Max)80/100<\/span> <\/p> <\/td> <\/tr> 寬度<\/span>×<\/span>長度（<\/span>mm<\/span>）<\/span> <\/p> (Width x Length)<\/span> <\/p> <\/td> 1000×1650<\/span> <\/p> 一件（<\/span>One Piece<\/span>）<\/span> <\/p> <\/td> 1600×2000<\/span> <\/p> 一件（<\/span>One piece<\/span>）<\/span> <\/p> <\/td> 1600×3000<\/span> <\/p> 一件（<\/span>One piece<\/span>）<\/span> <\/p> <\/td> <\/tr> 825×1000<\/span> <\/p> 二件（<\/span>Two pieces<\/span>）<\/span> <\/p> <\/td> 1600×1000<\/span> <\/p> 二件（<\/span>Two pieces<\/span>）<\/span> <\/p> <\/td> 1600×1500<\/span> <\/p> 二件（<\/span>Two pieces<\/span>）<\/span> <\/p> <\/td> <\/tr> 500×825<\/span> <\/p> 四件<\/span>(Four pieces )<\/span> <\/p> <\/td> 800×1000<\/span> <\/p> 四件<\/span>(Four pieces )<\/span> <\/p> <\/td> 800×1500<\/span> <\/p> 四件<\/span>(Four pieces )<\/span> <\/p> <\/td> <\/tr> 主軸<\/span> <\/p> Drilling spindle<\/span> <\/p> <\/td> 快換夾頭<\/span> <\/p> Quick-change drill chuck<\/span> <\/p> <\/td> 莫氏<\/span>3# <\/sup><\/span>，<\/span>4#<\/sup><\/span>維孔（<\/span>Morse 3# <\/span><\/sup>4#<\/sup><\/span>）<\/span> <\/p> Morse 3# 4#<\/span> <\/p> <\/td> <\/tr> 鉆頭直徑<\/span> <\/p> <\/span>Diameter of drilling head<\/span>（<\/span>mm<\/span>）<\/span> <\/p> <\/td> Φ12-Φ50<\/span> <\/p> <\/td> <\/tr> 變速方式<\/span> <\/p> The mode of speed adjustment<\/span> <\/p> <\/td> 變頻器無級變速<\/span> <\/p> Transducer stepless speed adjustment<\/span> <\/p> <\/td> <\/tr> 轉速（<\/span>r/min<\/span>）<\/span><\/span> <\/p> Rotate speed<\/span> <\/p> <\/td> 120-560<\/span> <\/p> <\/td> <\/tr> 行程長度<\/span>(mm)<\/span> <\/p> Stroke<\/span> <\/p> <\/td> 180<\/span> <\/p> <\/td> 240<\/span> <\/p> <\/td> <\/tr> 加工進給<\/span> <\/p> Processing feeding<\/span> <\/p> <\/td> 液壓無級調速<\/span> <\/p> Hydraulic steeples speed adjustment<\/span> <\/p> <\/td> <\/tr> 工件夾緊<\/span> <\/p> Hydraulic clamping<\/span> <\/p> <\/td> 夾緊厚度<\/span> <\/p> Thickness of clamping<\/span> <\/p> （<\/span>mm<\/span>）<\/span> <\/p> <\/td> 15-80<\/span> <\/p> <\/td> 15-80/35-100<\/span> <\/p> <\/td> <\/tr> 夾緊缸個數（個）<\/span> <\/p> Qu**ty of clamping cylinder<\/span><\/span> <\/p> <\/td> 12<\/span> <\/p> <\/td> <\/tr> 夾緊力（<\/span>kN<\/span>）<\/span> <\/p> Clamping power<\/span> <\/p> <\/td> 7.5<\/span> <\/p> <\/td> <\/tr> 夾鉗開啟方式<\/span> <\/p> Start-up clamping<\/span><\/span> <\/p> <\/td> 腳踏開關<\/span> <\/p> Foot-switch<\/span> <\/p> <\/td> <\/tr> 冷卻液<\/span> <\/p> Cooling fiuid<\/span> <\/p> <\/td> 方式<\/span> <\/p> Mode<\/span> <\/p> <\/td> 冷卻液體強制循環<\/span>Forcing cycle<\/span> <\/p> <\/td> <\/tr> 容量<\/span> <\/p> Volume<\/span>（<\/span>L<\/span>）<\/span> <\/p> <\/td> Appr<\/span>約<\/span>100<\/span> <\/p> <\/td> <\/tr> 液壓<\/span> <\/p> Hydraulic system<\/span> <\/p> <\/td> 夾緊壓力<\/span><\/span> <\/p> Clamping pressure<\/span>（<\/span>MPa<\/span>）<\/span><\/span> <\/p> <\/td> 7.5<\/span> <\/p> <\/td> <\/tr> 進給壓力<\/span> <\/p> Feeding pressure<\/span>（<\/span>MPa<\/span>）<\/span> <\/p> <\/td> 2<\/span> <\/p> <\/td> <\/tr> 油箱容量<\/span> <\/p> Volume of oil tank<\/span>（<\/span>L<\/span>）<\/span> <\/p> <\/td> 120<\/span> <\/p> <\/td> <\/tr> 空氣壓力<\/span> <\/p> Air Pressure<\/span> <\/p> <\/td> 氣源<\/span> <\/p> Source of compressed air<\/span>（<\/span>MPa<\/span>）<\/span> <\/p> <\/td> 0.4<\/span> <\/p> <\/td> <\/tr> 電機<\/span> <\/p> Motor<\/span> <\/p> <\/td> 主軸<\/span><\/span>Spindle<\/span>（<\/span>kW<\/span>）<\/span> <\/p> <\/td> 5.5<\/span> <\/p> <\/td> <\/tr> 液壓泵<\/span> <\/p> Hydraulic pump<\/span>（<\/span>kW<\/span>）<\/span> <\/p> <\/td> 2.2<\/span> <\/p> <\/td> <\/tr> 冷卻泵<\/span> <\/p> Cooling pump<\/span>（<\/span>kW<\/span>）<\/span> <\/p> <\/td> 0.25<\/span> <\/p> <\/td> <\/tr> 排屑器電機<\/span> <\/p> Chip removal motor <\/span>（<\/span>kW<\/span>）<\/span> <\/p> <\/td> 0.4<\/span> <\/p> <\/td> <\/tr> X<\/span>軸伺服系統<\/span>Servo system of X axis<\/span>（<\/span>kW<\/span>）<\/span> <\/p> <\/td> 1.5<\/span> <\/p> <\/td> <\/tr> Y<\/span>軸伺服系統<\/span>Servo system of Y axis<\/span>（<\/span>kW<\/span>）<\/span> <\/p> <\/td> 1<\/span> <\/p> <\/td> <\/tr> 機器總功率<\/span><\/span> <\/p> Total power<\/span> <\/p> <\/td> kW<\/span> <\/p> <\/td> 15<\/span> <\/p> <\/td> <\/tr> 機器尺寸<\/span> <\/p> Overall dimensions<\/span> <\/p> <\/td> 長<\/span>×<\/span>寬<\/span>×<\/span>高<\/span>(<\/span>不包括排屑器<\/span>)<\/span> <\/p> Length x Width x Height<\/span> <\/p> <\/td> 3800×2200×2780<\/span> <\/p> <\/td> 4350×2800×2950<\/span> <\/p> <\/td> 5800*2800*2950<\/span> <\/p> <\/td> <\/tr> 重量<\/span> <\/p> Weight<\/span> <\/p> <\/td> 主機<\/span> <\/p> Main Body<\/span>（<\/span>kg<\/span>）<\/span> <\/p> <\/td> Approx 4000<\/span> <\/p> <\/td> Approx 5500<\/span> <\/p> <\/td> Approx 6100<\/span> <\/p> <\/td> <\/tr> 排屑系統<\/span> <\/p> Chip Removal System<\/span> <\/p> （<\/span>kg<\/span>）<\/span> <\/p> <\/td> 400<\/span> <\/p> <\/td> <\/tr> <\/tbody> <\/table><\/b><\/div>
免責聲明：所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，機電之家網對此不承擔任何責任。機電之家網不涉及用戶間因交易而產生的法律關系及法律糾紛，糾紛由您自行協商解決。 {{msg.senderNick}}{{formattedTime(msg.time)}} {{msg.senderNick}}{{formattedTime(msg.time)}}
-高效、高精度、穩定性好、操作方便。 <\/p>
-機床有兩個工作臺，當其中一個工作臺上的工件進行加工時，另一工作臺可移出以便進行工件安裝和拆卸大幅減少工件裝夾時間、提高生產效率。
-該機采用高效自控行程鉆削動力頭，無需人工設置鉆頭長度和工件厚度能自動進行快進一工進一快退的轉換，方便操作。
-工件采用液壓夾緊，小工件可同時裝夾四組，以縮短生產準備周期，提高生產效率。
-上位機軟件界面人性化設計，打開上位機，實時監控，界面及輸入輸出全監控，便可以從該界面直接了解到當前機床所有運行狀態等。
-機床采用集中潤滑方式，以確保功能部件得到良好潤滑，提高機床性能，延長使用壽命。 <\/p><\/div> <\/div> 產品參數：<\/strong><\/div> <\/div> <\/div>
溫馨提示
友情提醒：本網站僅作為用戶尋找交易對象，就貨物和服務的交易進行協商，以及獲取各類與貿易相關的服務信息的平臺。為避免產生購買風險，建議您在購買相關產品前務必確認供應商資質及產品質量。過低的價格、夸張的描述、私人銀行賬戶等都有可能是虛假信息，請采購商謹慎對待，謹防欺詐，對于任何付款行為請您慎重抉擇！如您遇到欺詐等不誠信行為，請您立即與機電之家網聯系，如查證屬實，機電之家網會對該企業商鋪做注銷處理，但機電之家網不對您因此造成的損失承擔責任！
您也可以進入“消費者防騙指南”了解投訴及處理流程，我們將竭誠為您服務，感謝您對機電之家網的關注與支持！
在線詢盤/留言 請仔細填寫準確及時的聯系到你
您是不是在找
